Saramonic SmartRig+ 2-CH Audio Interface With XLR 1/4in & 1/8in Inputs for Iphone/Ipad/Android Smartphones or DSLR Mirro

Features The SmartRig features three different kinds of inputs and there are two of each XLR 1 4in 6 35mm and 1 8in 3 5mm The XLR inputs can supply condenser microphones with 48 volts of phantom power which enables you to use almost any kind of microphone The 1 4in 6 35mm inputs are impedance matched to provide the best sound quality from electric guitars and basses and acoustic instruments with pickups A Mono Stereo switch on the SmartRig lets you choose how the channels will be mixed when connected to a camera or mobile device When set to Mono anything your plugin will be recorded to both channels of the camera or mobile device The built in preamps provide clean sound and if your camera lacks a headphone output you can use the jack on the SmartRig Two nicely sized gain control knobs allow you to dial in perfect levels with ease Specifications Frequency Response 20Hz to 20kHz 0 5dBDistortion Less than 0 01 1kHz 30dBu inputSignal to Noise Ratio 80dB 1kHz 30dBu inputNoise 98dB full band with Phantom Power Gain 23dBuMaximum Output Level 2VrmsPhantom Power 48VPhantom Max Current 13mAChannels 2Inputs 2 x XLR 1 4in 6 35mm Combo Jack and 2 x 1 8in 3 5mm TRSSelectable Mixer Mono or Stereo Output via Toggle SwitchOutputs 1 x Male 1 8in 3 5mm TRRS Output Cable and 1 x Female 1 8in 3 5 mm Headphone JackSelectable Output TRS for Camera Recorder or TRRS for Mobile Devices via Toggle SwitchBattery 1 x 9 volt Alkaline or Lit